Industrial Material & Freight Sizing

Material Weight & Freight Density Calculator

Select an industrial material or enter custom density. Calculate dimensions to total weight, volume, NMFC class, and trailer payload limits.

Select Material Database Entry

Density (PCF)

lbs/cu ft

Raw Material Shape

Thickness (in)

Width (in)

Length (in)

Quantity

Total Shipment Weight

367 lbs

166 kg · (5 units)

Single Piece Weight

73.3 lbs

33.3 kg per unit

Freight Class & Density

Class 50

55 PCF (0.881 g/cm³)

53ft Semi PayloadOK

0.8%

of 45,000 lbs legal payload

Logistics & Transport Recommendations

Pallet Packaging Rule

Safe stacking limit: 34 pieces per pallet to stay within the 2,500 lbs standard wood pallet rating.

NMFC Item Guidance

Reference code: 155250 (Lubricating Oils in Drums). Rated under Class 50 based on 55 PCF density.

Shipment utilizes 0.8% of a standard 53ft trailer's 45,000 lbs legal cargo payload (44,633 lbs capacity remaining).
Standard GMA pallet recommendation: Maximum 34 units per pallet to remain within the 2,500 lbs safe working limit.

Shipping, Packaging & Stacking Specifications for Motor Oil

Transport & Palletizing Rules

Shipped in standard 55-gallon steel drums (4 drums per pallet = ~1,950 lbs) or 330-gallon composite IBC totes.

Typical Industrial Applications

Engine crankcase oil
Hydraulic fluid base
Industrial gearbox oil
Heavy equipment maintenance

Critical Handling Cautions:

Pallet shrink wrap must secure all 4 drums tightly to prevent barrel toppling

Material density and metallurgical weight benchmarks correspond to standard test specifications from ASTM International and density rating tables from NMFTA.

Compare with Other Bulk Liquids & Agricultural

View all materials

Class 55Fresh Pure Water (at 60°F / 15.6°C)

62.4 lbs/cu ft

Class 60Ultra-Low Sulfur Diesel Fuel (ULSD #2)

53 lbs/cu ft

Class 55Yellow Dent Corn (Shelled Field Corn)

45 lbs/cu ft

Motor Oil Weight & Freight FAQs

What is the density of Motor Oil / Engine Lubricant (SAE 30) in lbs/cu ft and g/cm³?

The standard density of Motor Oil / Engine Lubricant (SAE 30) is 55 pounds per cubic foot (lbs/cu ft), which equals 0.88 grams per cubic centimeter (g/cm³) or 880 kilograms per cubic meter (kg/m³).

What NMFC freight class is assigned to Motor Oil?

Due to its density of 55 PCF, shipments of Motor Oil typically qualify for Class 60 (the lowest, most economical LTL freight tier for dense cargo exceeding 50 lbs/cu ft). The primary reference item is 155250 (Lubricating Oils in Drums).

How many pieces of Motor Oil can I load on a standard pallet?

A standard GMA 48x40 wooden pallet is rated for a maximum payload of 2,500 lbs. Use our interactive calculator above to enter your exact plate, bar, or tube dimensions to verify your pieces-per-pallet threshold before strapping.